Gitzo R. No.2 [Tripod]
Gitzo R. No.2
2ウエイ雲台。重量は1kgある。
一時期、1000mmのレフレックスレンズを持っていたが、それ用に購入した。
2-way Head. Weight is 1 kg.
At one time, so I had the reflex lens of 1000 mm, was purchased for it.
2ウエイ雲台。重量は1kgある。
一時期、1000mmのレフレックスレンズを持っていたが、それ用に購入した。
2-way Head. Weight is 1 kg.
At one time, so I had the reflex lens of 1000 mm, was purchased for it.
Gitzo G275 [Tripod]
Gitzo G275
これは407と一緒に買ったオフセンターボール雲台。人によって好みがあると思うが、好んで使っていた。しかし、最近の重いレンズを付けたデジタル一眼レフカメラでは、グリップを上に縦位置にしたとき重量で回転してしまい使用頻度が減ってしまった。
Weight: 0.6 kg
This off-center ball Head that I bought with the 407. Although I think that there is a preference by people, I was using well. However, digital single-lens reflex camera which attached recent heavy lens, will rotate in weight when it is vertically positioned above the grip, and frequency of use had decreased.
これは407と一緒に買ったオフセンターボール雲台。人によって好みがあると思うが、好んで使っていた。しかし、最近の重いレンズを付けたデジタル一眼レフカメラでは、グリップを上に縦位置にしたとき重量で回転してしまい使用頻度が減ってしまった。
Weight: 0.6 kg
This off-center ball Head that I bought with the 407. Although I think that there is a preference by people, I was using well. However, digital single-lens reflex camera which attached recent heavy lens, will rotate in weight when it is vertically positioned above the grip, and frequency of use had decreased.
GITZO 407 [Tripod]
GITZO 407
40年くらい前に買った三脚。ゴムの滑り止めをGITZOでは今でも製造していて、取り寄せできるが、自作で皮製に交換した。数年前に自分で分解掃除した。
3段、エレベーター（31cm）
長さ：61～154cm（エレベータを含めると185cm）
重量：2.4kg
脚を広げると54.2～166.2cmの高さで使える。
この三脚は、リングを緩めると重力で自然に滑らかに伸縮し精密な造りを感じる。
Tripod that I bought long ago in '40. Have been manufactured in GITZO the slip rubber, obtaining may be, but replacing the leather with self-made. I was disassembly and cleaning myself in a few years ago.
3-Section, with elevator (31 cm)
Length: 61 to 154 cm (Including the elevator 185 cm)
Weight: 2.4 kg
In fact, it can be used at a height of 54.2 to 166.2 cm.
This tripod, when loosening the ring, naturally smoothly expansion and contraction by gravity, are feeling the precise structure.
40年くらい前に買った三脚。ゴムの滑り止めをGITZOでは今でも製造していて、取り寄せできるが、自作で皮製に交換した。数年前に自分で分解掃除した。
3段、エレベーター（31cm）
長さ：61～154cm（エレベータを含めると185cm）
重量：2.4kg
脚を広げると54.2～166.2cmの高さで使える。
この三脚は、リングを緩めると重力で自然に滑らかに伸縮し精密な造りを感じる。
Tripod that I bought long ago in '40. Have been manufactured in GITZO the slip rubber, obtaining may be, but replacing the leather with self-made. I was disassembly and cleaning myself in a few years ago.
3-Section, with elevator (31 cm)
Length: 61 to 154 cm (Including the elevator 185 cm)
Weight: 2.4 kg
In fact, it can be used at a height of 54.2 to 166.2 cm.
This tripod, when loosening the ring, naturally smoothly expansion and contraction by gravity, are feeling the precise structure.
Kenko KDS mount remodeling [Tripod]
望遠レンズで写真を撮る時、三脚の雲台の角度の微調整が難しい。そこで、ケンコーKDSマウントを改造した。ケンコーKDSマウントは、水平と上下の回転が2つのノブで微調整でき、適度なフリクションで直接回転することもできる。しかし重心位置が高くなるので、部品の一つを180度回転し雲台を付け替えた。フリクション調整のノブは六角レンチで調整できるボルトに付け替えた。ケンコーKDSマウントにはプレートが付属していないので、GITZO GS2370LAを購入した。
When take a picture with a telephoto lens, it is difficult to fine adjustment of the angle of the pan head of the tripod. So, it was remodeled Kenko KDS mount. Kenko KDS mount can be finely adjusted with knob rotation of two vertical and horizontal, and can be rotated directly with moderate friction. However, since gravity center position is high, the one component is rotated 180 degrees and re-attach the pan head. Knob of friction adjustment was replaced with a bolt that can be adjusted with an Allen wrench. Since tKenko KDS mount does not come with he plate, I have purchased a GITZO GS2370LA.
Original KDS mount
GITZO GS2370LA
Normal use.
It opened the hole to secure the pan head. Creating a spacer of acrylic so that the pan head is firmly fixed.
After remodeling
When take a picture with a telephoto lens, it is difficult to fine adjustment of the angle of the pan head of the tripod. So, it was remodeled Kenko KDS mount. Kenko KDS mount can be finely adjusted with knob rotation of two vertical and horizontal, and can be rotated directly with moderate friction. However, since gravity center position is high, the one component is rotated 180 degrees and re-attach the pan head. Knob of friction adjustment was replaced with a bolt that can be adjusted with an Allen wrench. Since tKenko KDS mount does not come with he plate, I have purchased a GITZO GS2370LA.
Original KDS mount
GITZO GS2370LA
Normal use.
It opened the hole to secure the pan head. Creating a spacer of acrylic so that the pan head is firmly fixed.
After remodeling
Manfrotto 300N [Tripod]
高画素のパノラマ写真を撮ってみようと思いマンフロットのパノラマヘッド300Nを買った。
下の写真で右に見えるネジを差し込むところによって、360°を4～72カットの範囲で10段階のクリックが設定できる。例えば焦点距離60mmのレンズは横が32°くらいなので12カットに設定すれば360°パノラマ写真が撮れることになる。
I think to try to take a panoramic photo of high pixel, I bought a panorama head Manfrotto 300N.
In the photo below, by the place where a screw visible on the right is inserted, 10 stage-click can be set in the range of 4 to 72 cuts the field of view of 360 degrees. For example, since the horizontal field of view is 32 degrees in the focal length 60mm lens, it becomes possible to take 360degrees panoramic photographs to be set to 12 cuts.
Manfrotto 300N
panoramic photo, 20585 x 1026 pixels
下の写真で右に見えるネジを差し込むところによって、360°を4～72カットの範囲で10段階のクリックが設定できる。例えば焦点距離60mmのレンズは横が32°くらいなので12カットに設定すれば360°パノラマ写真が撮れることになる。
I think to try to take a panoramic photo of high pixel, I bought a panorama head Manfrotto 300N.
In the photo below, by the place where a screw visible on the right is inserted, 10 stage-click can be set in the range of 4 to 72 cuts the field of view of 360 degrees. For example, since the horizontal field of view is 32 degrees in the focal length 60mm lens, it becomes possible to take 360degrees panoramic photographs to be set to 12 cuts.
Manfrotto 300N
panoramic photo, 20585 x 1026 pixels
GITZO GLEVEL 1 [Tripod]
GITZO GLEVEL 1はGITZOの1型三脚のセンターポールの下端に付ける水準器である。
GITZOの製品カタログにはセンターポール下端のフック部品を取り外し工具なしで取り付けられるとあるが、フック部品が付いてないので、クイックリリースプレートGITZO GS2370LAに付属していた3/8"のツマミ付ネジで取り付けた。
安価なので水平の精度も低かろうと思っていたが、わずかな傾きも検知するようだ。バブルの動きが遅いので、バブルの動きに合わせてゆっくりと調整する必要がある。
GITZO GLEVEL 1 is the level puts on lower end of the center pole of GITZO type 1 tripod.
The product catalog of GITZO, it is written to be attached without tools to remove the hook part of the center pole lower end. The product catalog GITZO, it is written that it can be attached by removing the hook part of the center pole bottom end without tools. However, since in my tripod it does not have a hook part, I was attached with 3/8 inch screw that shipped with quick-release plate GITZO GS2370LA.
I had expected it would be a low horizontal accuracy because it is inexpensive. In practice, however, it seems to detect a slight tilt. Since the movement of the bubble is slow, it is necessary to slowly adjust to the movement of the bubble.
GITZOの製品カタログにはセンターポール下端のフック部品を取り外し工具なしで取り付けられるとあるが、フック部品が付いてないので、クイックリリースプレートGITZO GS2370LAに付属していた3/8"のツマミ付ネジで取り付けた。
安価なので水平の精度も低かろうと思っていたが、わずかな傾きも検知するようだ。バブルの動きが遅いので、バブルの動きに合わせてゆっくりと調整する必要がある。
GITZO GLEVEL 1 is the level puts on lower end of the center pole of GITZO type 1 tripod.
The product catalog of GITZO, it is written to be attached without tools to remove the hook part of the center pole lower end. The product catalog GITZO, it is written that it can be attached by removing the hook part of the center pole bottom end without tools. However, since in my tripod it does not have a hook part, I was attached with 3/8 inch screw that shipped with quick-release plate GITZO GS2370LA.
I had expected it would be a low horizontal accuracy because it is inexpensive. In practice, however, it seems to detect a slight tilt. Since the movement of the bubble is slow, it is necessary to slowly adjust to the movement of the bubble.
